Kala Sirocco hot and cold laminators are designed for printers and finishers willing to offer the most comprehnsive finishing requirements up to a width of 1.08m (43”). Versatile and economical, these machines can operate both pressure sensitive and thermal film. Sirocco perform well with middle size job runs when using thermal film and can produce large runs with pressure sensitive film. The perfect choice for your first roll lamination system.
There are two machines available depending on the size of your print and your printing capacity: Sirocco 1080 in 1.08m (43”). Sirocco 1080 is delivered as a table top laminator which can be fitted with an optional stand.
All the functions are microprocessor controlled and centralised on the control panel for smooth operation.
Scirocco 1600 Specifications:
Max. working width 1600 mm (63”)
Width of the roller 1674 mm (66”)
Diameter of the heating rollers 78 mm (3 1/12”)
Max. thickness of print + board 25 mm (1”)
Max. thickness of the film 250 microns / side (10 mil)
Adjustment and display yes, from 40 to 160°c of the roller temperature 104 to 320°F
Digital display of the roller pressure yes
Upper & lower winding and unwinding spindles yes
Number of spindles delivered with the machine 4
Max. speed meter/min - (ft/min) 3 - (10)
Reverse operation yes
Motor control pedal yes
Emergency stop button 2
Stand mounted on self-locking castors yes
Electrical print rewinding system Optional
Power of the motor (W) 100
Heating power (W) 3400
Voltage 230V / 50Hz - 60 Hz single phase
Amp 16 amps
Size of the machine L 194x D 76x H 137cm - (77'' x 30” x 54”)
Weight of the machine kg - (Lbs) 287 - (632)
Size of the shipping crate L 225x D 105x H 100 cm - (89''x42'' x40”)
Shipping weight kg - (Lbs) 335 - (737)
Made in France - EC Certification
