Kala Sirocco hot and cold laminators are designed for printers and finishers willing to offer the most comprehnsive finishing requirements up to a width of 1.08m (43”). Versatile and economical, these machines can operate both pressure sensitive and thermal film. Sirocco perform well with middle size job runs when using thermal film and can produce large runs with pressure sensitive film. The perfect choice for your first roll lamination system.
There are two machines available depending on the size of your print and your printing capacity: Sirocco 1080 in 1.08m (43”). Sirocco 1080 is delivered as a table top laminator which can be fitted with an optional stand.
All the functions are microprocessor controlled and centralised on the control panel for smooth operation.
Kala Sirocco 1080 Specifications:
Max. working width: 1080mm (42.5”)
Length of the roller: 1130mm (44.5”)
Diameter of the heating rollers: 54mm
MMax. mounting thickness: 25 mm (1”)
Max. thickness of the film: 125microns / side
Digital display of the roller temperature: yes, from 40 to160°c
Digital display of the roller pressure: yes
Upper winding spindle: yes
Number of spindles delivered with the machine: 3
Max. speed meter/min: 3
Reverse operation: yes
Motor control pedal: yes
Emergency stop button: 2
Stand mounted on self-locking castors: yes
Electrical print rewinding system: optional
Power of the motor: 100W
Heating power: 2800W
Volt: 230V / 50Hz - 60 Hz single phase, 13 amps
Size of the machine: (without stand) L1420xD620xH648mm
Weight of the machine: 164Kg
Made in France - EC Certification
